Distributors Stock
Part #01002-4931
Need more information?
Contact us to request pricing, availability and customization options
Contact UsFeatures
- Wide operating temperature range
- Ruggedized, well-sealed unit for long life operation
- Industry standard interfaces make it easy to install
- Extensive electrical protection reduces damage due to miswiring
- High noise immunity especially useful in electrically noisy automation environments
- Selected configurations available in 1 to 3 days shipment (“Express Encoder” option)
Specifications
Shaft Diameter | 3/8” standard (1/4” as special feature) |
Flat on Shaft | 3/8” Shaft: 0.75 long X 0.03” deep, 1/4” shaft 0.75 X .02 deep |
Shaft Loading | 3/8” shaft: Up to 40 pounds axial and 35 pounds radial |
Shaft Runout | 0.0005 T.I.R. at midpoint regardless of shaft diameter). |
Starting Torque at 25°C | 1.0 in-oz max without shaft seal; 2.5 in-oz max with shaft seal. |
Bearings | High precision ball bearings, Material: Chrome steel; shielded bearings standard, sealed bearings optional |
Shaft Material | Stainless Steel |
Bearing Housing | Die cast aluminum with protective finish |
Cover | Die cast aluminum with protective finish |
Bearing Life | 2 X 108 revs (1300 hrs at 2500 RPM) at rated load, 1 X 1010 revs (67,000 hrs at 2500 RPM) at 10% of rated load |
Maximum RPM | 10,000 RPM nominal, 8000 RPM with 1/2” shaft (see Frequency Response, below) |
Moment of Intertia | 4.1 X 10-4 oz-in-sec2 |
Weight | 13 oz typical |
Code | Incremental |
Output Format | 2 outputs in quadrature, A leads B CCW, 1/2 cycle index , Z, gated with negative B Consult factory for other output formats.. |
Cyles per Shaft Turn | 2 to 80,000 (see table 2) |
Supply Voltage | 5 to 28 VDC +/- 5% |
Current Requirements | 100 mA typical +output load, 250 mA (max) |
Voltage/Output | (See notes) 15/V: Line Driver, 5–15 VDC in, Vout = Vin 28/V: Line Driver, 5–28 VDC in, Vout = Vin 28/5: Line Driver, 5–28 VDC in, Vout = 5 VDC 28/O: Open Collector, 5–28 VDC in, OCout |
Protection Level | Reverse, overvoltage and line driver output protection diodes |
Frequency Response | 300 kHz |
Output Terminations | See Table 1 in the datasheet |
Enclosure Rating | IP65 Standard with M12 connector or Cable Gland output terminations. (Includes SCS18-M18 option) |
Temperature | Standard operating temperature -40° C to +85° C; options available at -40° C to +100° C (Consult factory). Storage temperature -40° C to +100° C |
Shock | 100 g’s for 5 msec duration |
Vibration | 50 to 2000 Hz @ 30grms |
Humidity | 98% RH without condensation |
Type | Family | Housing Configuration | Optional Face Mounts | Shaft Seal Configuration | Cycles per Turn | Number of Channels | Complements | Voltage/Output | Output Termination Location | Output Termination | Hazardous Area Ratings | Special Features |
X = Express (3 days leadtime) Blank = Standard Leadtime |
H25 = Heavy Duty; 2.5” diameter | D = Square Flange E = 2.50 Diameter Servo Mount G = 2.62 Diameter Servo Mount See dimensions |
F1 (Included with Express Encoder H25E housing) F2 (Available with H25G housing only) F3 or F4 Blank = None |
SS = Shaft Seal (Not available on H25G) Blank = Shielded Bearing |
(Enter Cycles) See Table 2 in the Datasheet |
A = Single Channel AB = Dual Quad. Channel ABZ = Dual with Index AZ = Single with Index |
C = Complementary Outputs Blanks = None | 15/V = 5–15 Vin/out 28/V = 5–28Vin/out 28/5 = 5–28Vin/5Vout 28/O = 5–28Vin/OCout |
E = End S = Side |
M12 = MS3112E12-10P M16 = MS3102R16S-1P M18 = MS3102R18-1P C = Pigtail Cable CS = Cable with seal Cable length specified in inches (i.e. C18 = Pigtail 18” long) See table 1 |
Blank = None EX = Intrinsically Safe NI = Non-Incendive Contact factory for voltage options |
S = Special Features specified on purchase order (consult factory) See note 6 |