*
*
Heating
 
Line Break:
   
   
 
Pilot Duty:
   
   
Contacts
 


Related Pages

Site Updated October 16, 2016

* * * Sensata > Products > Klixon Brand > Thermostats > HVAC/R + Industrial >

Klixon® Stat-On-Stilts Series (SOS)
Extended Airstream Mount



ISO9001 certification
UL / CSA approved
Produced at ISO 9000/QS 1400 certified manufacturing sites
100% function tested
Low–cost, reliable operation (built on proven 1NT thermostat)
High temperature capability: operating temperature to +177°C (+350°F)
Welded 1-piece terminal eliminates loose rivet joints
Enclosed or exposed discs available
Tamper–proof, patented Klixon snap–acting bimetal disc
Multiple mounting configurations: 3" or 7" extension; standard molded housing assures exceptional dimensional stability; 1/4" and 3/16" QC terminals available; stamped phenolic construction allows low-profile mounting
Variety of configurations available, including custom setpoints and switch configurations, manual reset, single operation devices
One shot: meets agency requirements for single operation device


Stat-On-StiltsTM from Sensata Technologies are custom-built thermostats designed to meet your specific application requirements. Their patented, tamperproof Klixon® snap–acting bimetal disc provides reliable, repeatable switch actuation, for electrical loads ranging from dry circuits to 10A@240 VAC.

The unique welded, single-piece terminal construction insures reliable, low resistance electrical connections. Rivet joints which may loosen or loose electrical continuity are eliminated.

The core of Stat-On-Stilts is the proven 1NT thermostat. Recognized by all major worldwide agencies, hundreds of millions of 1NTs are used daily in a wide variety of appliances.

While most Stat-On-Stilts are built to automatically reset 17°C (30°F) below their opening temperature, custom setpoints and switch configurations are available, including manual reset and single operation devices.

Qualifications
File Number
Category
UL
E9977
XAPX8
CSA
LR21794
482302


Performance

Characteristics
Operating Temperatures
100°F to 350°F (38°C to 177°C)
Standard setpoints available at 5°F increments.
Standard Differential
30°F (16.7°C)
Minimum Differential
20°F (11°C)


Standard Temperatures and Tolerances

Nominal Open Temperature
Standard Tolerances
Open
Close
100°F to 195°F
5.5°F
9.0°F
200°F to 245°F
6.5°F
10.0°F
250°F to 300°F
7.5°F
10.0°F
305°F to 350°F
9.0°F
13.0°F
This chart is representative of a standard commercial device. Sensata offers specific variants with similar performance that are dependant on customer specifications. For more information, contact us.


Applications

Primary temperature limit in as furnaces and unit heaters
Electric furnaces
 
... Anywhere a temperature switch must be remote from electrical terminations
* * *
Klixon


Klixon Stat-On-Stilts

Download Datasheet
Requires Acrobat Reader.

Request more info.
The World Depends on Sensors and Controls