The MMS Series Inverter / Charger is a pure sine wave inverter providing a cost effective solution for those with smaller power needs in mobile applications. Versatile, easy-to-use, and lightweight, the MMS Series provides a reliable base for your energy system.
Power Factor Corrected (PFC) Charger: Our PFC charger is built into all of our inverter/chargers. It uses less energy from a generator than a standard charger – using 25-30% less AC current than standard chargers.
Safe and reliable: The MMS Series is ETL Listed to the stringent requirements of UL/cUL 458 and CSA C22.2 #107.1-01 for mobile use.
Attractive styling: The modern, hourglass case, paired with the die cast aluminum base combines form with function, creating an attractive unit that uses its base as a heat sink for superior high temperature operation.
Contact us to request pricing, availability and customization options
Contact UsMMS1012 | MMS1012-G | |
Input battery voltage range | 9 to 17 VDC | 9 to 17 VDC |
Nominal AC output voltage | 120 VAC ± 5% | 120 VAC ± 5% |
Output frequency and accuracy | 60 Hz ± 0.1 Hz | 60 Hz ± 0.1 Hz |
Total Harmonic Distortion (THD) | < 5% | < 5% |
1 msec surge current (amps AC) | 38 | 38 |
100 msec surge current (amps AC) | 21 | 21 |
5 sec surge power (real watts) | 1750 | 1750 |
30 sec surge power (real watts) | 1600 | 1600 |
5 min surge power (real watts) | 1200 | 1200 |
30 min surge power (real watts) | 1050 | 1050 |
Maximum continuous input current | 133 ADC | 133 ADC |
Inverter efficiency (peak) | 87% | 87% |
Transfer time | 16 msecs | 16 msecs |
Search mode (typical) | 5 watts | 5 watts |
No load (120 VAC output, typical) | 19 watts | 19 watts |
Waveform | Pure Sine Wave | Pure Sine Wave |
MMS1012 | MMS1012-G | |
Continuous output at 25° C | 50 ADC | 50 ADC |
Charger efficiency | 84% | 84% |
Power factor | > .95 | > .95 |
Input current at rated output (AC amps) | 7 | 7 |
MMS1012 | MMS1012-G | |
Transfer relay capability | 20 AAC (input current for charging and pass through) | |
Battery temperature compensation | Yes, 15 ft Battery Temp Sensor standard | |
Internal cooling | 0 to 59 cfm variable speed | |
Overcurrent protection | Yes, with two overlapping circuits | |
Overtemperature protection | Yes, on transformer and MOSFETS | |
On/Off with status indicator | Yes, front mounted and easily accessible | |
Low battery cutout | 10 VDC, adjustable with the ME-RC remote | |
AC output/AC input | Hardwire/Hardwire | Hardwire/3 ft cord |
Output circuit breaker/Input circuit breaker | 15A/20AAC | NA/15AAC |
Listings | ETL Listed to UL/cUL458, CSA C22.2 #107.1-01, meets KKK-A-1822E standard | |
Warranty | Two years |
MMS1012 | MMS1012-G | |
Temperature (Operating/Non-operating) | -20° C to +60° C (-4° F to 140° F) to -40° C to +70° C (-40° F to 158° F) | |
Operating humidity | 0 to 95% RH non-condensing |
MMS1012 | MMS1012-G | |
Dimensions (l x w x h) | 16.6” x 8.4” x 4.7” (42 cm x 21 cm x 12 cm) | |
Mounting | Shelf (top or bottom up) or bulkhead (vents up) | |
Weight | 23 lb (10.4 kg) | |
Shipping weight | 25 lb (11.3 kg) | |
Max operating altitude | 15,000’ (4570 m) | |
Construction | ABS plastic top and cast aluminum bottom |