The PTE7300 pressure sensor is the sensing platform from Sensata Technologies offering best-in-class accuracy with excellent mechanical shock resistance, EMC protection, and a fully hermetic IP69K package, to meet the most demanding applications in mid to high-pressure ranges.
Available with a wide range of ports, low power consumption, fast response time, and increased sensor diagnostics capabilities, these sensors enable simplified designs, allowing for a faster time-to-market.
Part #PTE7300-24DM-0B100SN
Contact us to request pricing, availability and customization options
Contact UsPressure Ranges | 0-16 bar to 0-600 bar (0-230 psi to 0-8700 psi) |
Pressure Reference | Gauge (Module) and Sealed Gauge (fully hermetic sensor) |
Supply Voltage | 2.7 VDC to 5.5 VDC |
Digital Interface | I2C with CRC (memory integrity, and data transmission) |
Device Address | 0xDA (including CRC) 0x6C (excluding CRC) |
Operating Current In Sleep Mode | 6.5 uA (typical) |
Operating Current In Active Mode | 3.7mA typical (4mA maximum) |
Available Data | Pressure (int16) Bridge temperature (int16) Status (int16) Device serial (int32) |
Resolution | 13 bit |
Response Time (12 bit) | < 1 ms |
Probe Configurations | On-demand, single cycle |
Recommended pull-up resistors | 1kOhm to 10kOhm, depending on cable length |
External Capacitive Load for I2C Bus Line | 400 pF max (depends on the cable length) |
ESD | ±4KV Contact; ±8KV Air |
Radiated Immunity | 80-1000MHz 3V/m 1400-2000MHz 3V/m 2000-2700MHz 1V/m |
Conducted Immunity | 0.15-80MHz 3Vrms |
Magnetic Immunity | 3 A/m for 5 minutes |
Proof Pressure | 2.5X full scale pressure |
Burst Pressure | 5X full scale pressure |
Vibration | IEC 60068-2-6 with 2.0mm displacement, Sensor: 30g (10...2000Hz); Module: 20g (10...2000Hz) |
Mechanical Shock | IEC 60068-2-27, 50g min, (Module); IEC 60068-2-27, 500g min (fully hermetic sensor) |
Drop (any Axis) | 1m |
Water Hammer | 1.6X full scale pressure for 100k cycles, 1.3xFS for 200k cycles |
Ingress Protection | IP00 (Module), IP69K (fully hermetic sensor) |
Media Compatibility | Fluids and Gases compatible with 17-4PH stainless steel |
Pressure (Best Fit Straight) | ±0.25% FS @ 25°C |
Pressure (Total Error Band) | +/-1.5%FS @-20° to 85°C |
Operating Endurance | >10M cycles |
Operating Ambient Temperature | -40° to +100°C |
Operating Media Temperature | -40° to +125°C |
Storage Temperature | -40° to +125°C |
Series | Pressure Port | Electrical Connector | External Sealing | Output Type | Pressure Range | Pressure Reference | Snubber |
PTE7300 | A: G1/4A DIN 3852-E B: 1/4-19PT (R1/4) C: 7/16-20 UNF-2A (MALE) D: 1/4-18NPT E: 7/16-20 UNF-2B (FEMALE) |
M: M12 5-pin glass-to-metal-seal (sensor only) N: 5x1 2mm pitch pin to header (module only) |
0: No sealing ring 1: FKM (Viton) sealing ring (only for G1/4A pressure port) 2: HNBR sealing ring (only for 7/16-20 UNF-2A MALE pressure port) |
B: I 2 C (12 ENOB + CRC) | 016: 0-16bar 050: 0-50bar 100: 0-100bar 200: 0-200bar 250: 0-250bar 350: 0-350bar 400: 0-400bar 500: 0-500bar (sensor only) 600: 0-600bar (sensor only) |
S: Sealed gauge (M12 5-pin only) B: Gauge (module only) |
N: No snubber S: Snubber with 0.5 damping hole |