Distributors Stock

Need more information?

Contact us to request pricing, availability and customization options

Contact Us

Features

Trip Free
Will trip open on overload, even when forcibly held on. This prevents the operator from damaging the circuit by holding the handle in the ON position.

Trip Indication
The operating handle moves positively to the OFF position on overload.

Environmental Specifications
Moisture and fungus resistance is provided by the use of moisture resistant finishes. Special springs and treatment for all ferrous parts eliminate inherent moisture-related problems. The use of fungi inert cases and handles avoids fungus-related problems.

Current Ratings
209/219/229 may be supplied with these ratings: DC, 50/60Hz, 400Hz, 0.1 to 100 amperes. 279 types may be supplied with DC ratings only, 0.1 to 100 amperes.

Voltage Ratings
On 209/219/229, voltages up to and including 240Vac, 50/60Hz or 400Hz, or 125Vdc are available. Multi-pole units can be supplied for 277Vac/480Vac, 50/60Hz. 279 types are available with a voltage of 160Vdc. All units will be marked with the standard maximum voltage. UL Listed breakers will be labeled with the UL listed voltage.

Auxiliary Switch Ratings
When supplied shall be S.P.D.T. configuration with a maximum rating of 10 amperes 250Vac.

Mounting Considerations
A three-inch spacing must be provided between the circuit breaker and vent and any conductive surface. If closer than three inches is necessary, then an insulator must be installed on the conductive surface.

Solderless Connectors
Connectors are rated AL9 CU. and accept either copper or aluminum conductors. Units are suitable for use with both 60° and 75° wire. Optional pressure plate for fine stranded wire is available. Contact factory for details.

Specifications

Current Ratings
(Amps)
Resistance (ohms) Impedance (Ohms)
DC Delays AC, 50/60Hz Delays
51, 52, 53 61, 62, 63
0.10 112.0 117.0
1.0 0.97 1.0
5.0 .042 .044
10.0 .011 .012
20.0 .0042 .0043
30.0 .0030 .0031
50.0 .0018 .0019
80.0 .0014 .0015
100 .0008 .0009

Notes: DCR and impedance based on 100% rated current applied and stablized a minimum of one hour.

Tolerance: .1 amperes to 1.0 amperes, ± 10%; 1.1 amperes to 5.0 amperes, ± 15%; 5.1 amperes to 15 amperes, ± 25%; 15.1 amperes to 100 amperes, ± 50%
or = .001 Ohms, whichever is greater.

 

# of Poles Ounces
1 9 oz
2 1 lb, 3 oz
3 2 lb
4 2 lb, 7 oz
5 3 lb
6 3 lb, 12 oz

 

Component Torque (in-lbs)
6-32 Mounting Inserts 6 to 8
M3 Mounting Screws 4 to 5
1/4-20 Screw Terminals 35 to 40
10-32 Stud Terminals 13 to 14
M5 Stud Terminals 13 to 14
1/4 - 20 Stud Terminals 40 to 45
Where applicable, mechanical support must be provide to the terminals when applying torque

 

Related Resources