Distributors Stock
Need more information?
Contact us to request pricing, availability and customization options
Contact UsDownloads
Specifications
| Dimensions | See Figure 1 (in datasheet) |
| Weight | 2.1 oz. (Approx.) |
| Moment of Inertia | 2.6 x 10-5oz in sec2 |
| Bore Size | see “Ordering Options” |
| Mount Holes | #4-40 or M3 x 0.5 @ 180° on 1.812” dia. B.C. |
| Mount Hardware | 2 socket head cap screws |
| Perpendicularity Shaft to Mount | 0.002” TIR |
| Shaft Runout | 0.005” max (each 0.0001 degrades accuracy by 0.5 arc minutes) |
| Shaft Endplay Dynamic or Static | ±0.010” |
| Shaft Finish | 16 micro inches or better. End must be chamfered or rounded |
| Shaft Tolerance | nominal -0.0002”/-0.0007” |
| Shaft Length | 0.56” minimum (remove cover button for motor through-shafts) |
| Code | Incremental |
| Pulses per revolutions (PPR) | See Ordering Options |
| Index Pulse Options | MX212: No Index MX213, MX216: U = Ungated Index, G = Gated Index |
| Supply Voltage | 5 volts ±5% @ 80mA max. |
| Output Format | MX212: Dual channel in quadrature MX213: Dual channel in quadrature with index MX216: Dual channel in quadrature with index and complements |
| Output Type | MX212 & 213 : square wave TTL. 16mA sink 500ΩA source. Short circuit protected MX216: TTL differential line driver (26LS31 or equiv.) should be terminated into a line receiver (26LS32, or equivalent circuit) |
| Frequency Response | Frequency (kHz) = (RPM X PPR)/60 |
| Rise Time | 1.0μ sec. max. |