M700 DC Pump Motor Controller (Obsolete)
Operator Controls
For lift equipment with hydraulic lift and steer functions, Sensata’s M700 DC pump motor controller provides superior programmable control of the pump motor and leveraging proprietary algorithms to support battery optimization and safety. It features microprocessor-based logic with programmable parameters to offer maximum flexibility to tailor the product to the needs of the application. In addition to configuration flexibility, use of the programmer offers diagnostics and test capability. It is the ideal solution for hydraulic pump motor control on aerial work platform (AWP) equipment.
Applications: Battery-power vehicle applications using pump motor, personnel carriers, mobile elevating work platforms, DC wound motors used in Hydraulic Pump Scissor Lifts.
Industries
Distributors Stock
Need more information?
Contact us to request pricing, availability and customization options
Contact UsFeatures
- Programmable and Flexible
- Configurable parameters
- MOSFET short-circuit protection function
- Support multiple throttle types and high pedal disable (HPD)
- Short duration boost capability
- CAN communication with controller
- External status LED for system troubleshooting
- High efficiency, silent operation
- Child MCU monitor
Specifications
| Nominal Input Voltage | 24V and 36V |
| Voltage Range | 14V ~ 46.5V |
| PWM Operating Frequency | 15.6kHz |
| Electrical Isolation to Heatsink (No Contactors Engaged) | 500VAC (minimum) |
| KSI Input Current | 100mA |
| Logic Input Current | < 2mA |
| Status LED Output Current (Max) | < 2mA |
| Throttle Types | 2-wire rheostats: 0-5kΩ, 5kΩ-0 Voltage Throttles: 0-5V CANopen |
| Current Rating | 2 Minute 300A 5 Minute 250A 1 Hour 150A |
| Operating Temperature | -40 °C to 50 °C |
| Storage Temperature | -40 °C to 85 °C |
| Humidity | 70%R.H |
| Protection Level | IP54 |
| Mechanical Shock | 50g@12s for 3 times for each direction |
| Random Vibration | 10Hz to 2000Hz, 5.58g @2h at each axis |
| EMC | EN 55022 EN 61000-3-2 EN 61000-3-3 IEC 61000-4-2 IEC 61000-4-3 IEC 61000-4-4 IEC 61000-4-5 IEC 61000-4-6 IEC 61000-4-8 IEC 61000-4-11 |
- Redundant hardware and software
- J4: ADMA TECH DMF-04-R-N.
- J6: ADMA TECH DMM-04-R-N-P-MT-V0
- Two Driver output with max 2A
| B+ | Positive pole of battery |
| B- | Negative pole of battery |
| M- | Negative pole of motor |
| J1 | Key switch connection |
| J2 | Connection to wire 1 of 2-wire rheostat |
| J3 | Connection to wire 2 of 2-wire rheostat, or voltage throttle input |
| J4 | Pin 1 RX |
| J6 | Pin 2 GND Pin 3 TX Pin 4 +12.7V Pin 1 DRIVER OUTPUT Pin 2 Interlock Pin 3 CANL Pin 4 CANH |
- EMC: Designed to the requirements of EN12895.
- Safety: Designed to the requirements of EN1175
- Accord with UL 583
| Part Number | Product | Description |
| M700-VR1 | M700 | Motor Controller |