Distributors Stock

Need more information?

Contact us to request pricing, availability and customization options

Contact Us

Features

Trip Free
Will trip open on overload, even when forcibly held in the ON position.

Trip Indication
The operating handle moves positively to the OFF position on overload.

Ambient Operation
APG/UPG protectors operate normally in temperatures between –40°C and +85°C.

Insulation Resistance
Not less than 100 megohms at 500Vdc.

Dielectric Strength
APG/UPG/IPG protectors withstand 1500 volts, 60Hz for 60 seconds between all electrically isolated terminals. Except auxiliary switch terminals shall withstand 600 Volts at 60Hz.

Endurance
Withstands 10,000 operations at rated voltage and current or withstands 50 operations of 600% AC or 1000% DC rated current at rated voltage followed by 6000 operations at rated voltage and current, in accordance with UL 1077.

Moisture Resistance
Meets all the requirements of MIL-PRF-55629 when tested in accordance with Method 106 of MIL-Std. 202.

Salt Spray (Corrosion)
Meets requirements of MIL-PRF-55629 when tested in accordance with Method 101 of MIL-Std. 202. All APG/UPG protectors are constructed with stainless steel springs and plated parts. In addition to meeting normal requirements for moisture and salt spray resistance, the protector meets the fungus resistance requirements of MIL-PRF-55629.

Poles
One through four poles with the UPGH, one through three poles with all other types.

MIL-PRF-55629 (APG)
Single, two and three pole versions, with and without the auxiliary switch option, have been qualified to MIL-PRF-55629.

Construction
Series, shunt, relay, dual coil, tapped coil, voltage trip, no-voltage trip, auxiliary switch, switch only. Various delays and combinations.

Shock
Withstands 100G or more without tripping while carrying full rated current per MIL-Std. 202, Method 213, Test Condition I.
Instant trip protectors are tested at 80% of rated current.

Vibration
Withstands 10G without tripping while carrying full rated current per MIL-Std. 202, Method 204, Test Condition A. Instant trip protectors are tested at 80% of rated current.

Specifications

Series Ounces Grams
APG/UPG/IPG 2.2 60.5
APGN/UPGN 3.0 76.2

 

Component Torque (in-lbs)
6-32 Mounting Inserts 6 to 8
M3 Mounting Screws 4 to 5
8-32 Screw Terminals 10 to 12
M4 Terminal Screws 10 to 12
10-32 Screw Terminals 14 to 15
M5 Screw Terminals 14 to 15
1/2 - 32 Mounting Bushing 30 to 35
Where applicable, mechanical support must be provide to the terminals when
applying torque

 

Related Resources