The World Depends on Sensors and Controls
*
Klixon 3MP Series
 
3MP
   
   
 
3MP Self–Hold
   
   
 


Klixon
Have a question? Email Klixon now. Click here.



Product Uses /\ Top

Washing machines
Dishwashers
Vacuum cleaners
Chain saws
Trimmers
Lawn mowers
Pumps

Site Updated October 16, 2016

* * * Sensata > Products > Klixon Brand > Motor Controls >

Klixon® 3MP series motor protector and thermal cut-out
Self–hold, 250VAC 6(1)A



Features and Overview Product Uses
Declarations to EN60730-2-2 Qualifications
Performance Characteristics
Data Sheet (PDF) » Contacts and distributors »




Features and Overview /\ Top

Snap–action Klixon disc
ENEC and UL approvals
120VAC and 230VAC
Compact design
Minimizes the total cost of the motor protection function
Provides higher level of safety for appliances having free access to rotating parts
Provides extra flexibility during the motor manufacturing process
Provides mounting flexibility and ease of handling
Guarantees to pass the UL 18 days locked rotor test in combination with high currents
Assures maximum protection under locked rotor conditions
European supply
Wide range of standard lead configuration available
Wide range of customization available, including: terminal configurations, leads, Mylar™ insulation sleeve, coding, colors
* * *
Klixon
Motor Control
CODE: 3MP self–hold series


Recent history has seen a growing demand for a non–self resetting motor protection device to ensure a high level of safety. Sensata Technologies has developed the self–hold motor protector for both 120 and 230VAC applications in a wide current range.

The operating principle of the 3MP self–hold is both simple and effective. The protector is actuated by the heat received from surrounding parts. The electrical circuit is interrupted when the disc reaches its pre–set open temperature. Due to the heat supply from the PTC pill, the bimetal disc does not cool down below the close temperature. The contacts will remain open until the appliance is switched off by the user, assuring a higher level of safety. when switched off, the device cools down to a safe temperature again and the contacts will automatically reset.

The bimetal disc provides excellent thermal and current sensitivity in over–load situations. Under locked rotor conditions the integrated heater in combination with the bimetal disc provides very accurate trip times for maximum protection.


Performance Characteristics /\ Top
Standard Operating Temperature Range
80°C to 140°C in increments of 5K
Tolerance on Open Temperature
±8K
Peak Temperature 5 minutes
200°C
Maximum Ambient Temperature
T - open + 20°C
Ambient Temperature to Guarantee Stable Self–Hold Function
0°C
Time check at T - ambient 25°C
4 to 10 seconds
Contact Rating Motor Protector
Depends on application and its test results
Contact Rating
18.0 Amp @ cos 0.6 / 250VAC / 300 cycles
Contact Rating Thermal Cutout
250VAC 6 (1) Amp
Contact Rating Motor Protector
Depends on the application and its test results


Qualifications /\ Top
UL
File number E15962
UL2111
ENEC
File number 2014531.07
EN60730-2-2 thermal motor protector


Declarations to EN60730-2-2 /\ Top
Purpose of the control
Thermal motor protector
PTI of insulation materials
PTI 175
Method of mounting
Off–winding, fixed position, no mounting limitation
Type of action
Type 3C
Reset characteristic
Automatic and/or Voltage (This is maintained by PTC heater. Device resets by interrupting power supply)
Control pollution degree
1 (per IEC 60730-1 Third Edition)
The World Depends on Sensors and Controls